Send documentation comments to mdsfeedback-doc@cisco.com
4-64
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear logging
clear logging
To delete the syslog information, use the clear logging command in EXEC mode.
clear logging {logfile | nvram | onboard information [module slot] | session}
Syntax Description
Defaults None.
Command Modes EXEC.
Command History
Examples The following example shows how to clear the debug log file.
switch# clear logging logfile
The following example shows how to clear the onboard system health log file.
switch# clear logging onboard system-health
!!!WARNING! This will clear the selected logging buffer!!
Do you want to continue? (y/n) [n]
Related Commands
logfile Clears log file messages.
nvram Clears NVRAM logs.
onboard information Clears onboard failure logging (OBFL) information. The types of
information include boot-uptime, cpu-hog, device-version, endtime,
environmental-history, error-stats, exception-log, interrupt-stats,
mem-leak, miscellaneous-error, module, obfl-history, obfl-log,
register-log, stack-trace, starttime, status, and system-health.
module slot Clears OBFL information for a specified module.
session Clears a logging session.
Release Modification
1.0(2) This command was introduced.
3.0(1) Added the onboard, module and session, options.
Command Description
show logging Displays logging information.
To Next Page
Loading...
Need help?
General