Send documentation comments to mdsfeedback-doc@cisco.com
5-36
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
dpvm abort
dpvm abort
To discard a dynamic port VSAN membership (DPVM) Cisco Fabric Services (CFS) distribution session
in progress, use the dpvm abort command in configuration mode.
dpvm abort
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Examples The following example shows how to discard a DPVM CFS distribution session in progress.
switch# config terminal
switch(config)# dpvm abort
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
dpvm database Configures the DPVM database.
dpvm distribute Enables CFS distribution for DPVM.
dpvm enable Enables DPVM.
show dpvm Displays DPVM information.
To Next Page
Loading...
Need help?
General