Send documentation comments to mdsfeedback-doc@cisco.com
4-87
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ssh hosts
clear ssh hosts
To clear trusted SSH hosts, use the clear ssh hosts command in EXEC mode.
clear ssh hosts
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows how to clear reset-reason information from NVRAM and volatile storage.
switch# clear ssh hosts
Related Commands
Release Modification
1.2(1) This command was introduced.
Command Description
show ssh hosts Displays SSH host information.
To Next Page
Loading...
Need help?
General