Send documentation comments to mdsfeedback-doc@cisco.com
23-15
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tape compression
tape compression
To configure tape compression, use the tape-compression command. To disable this feature, use the no
form of the command.
tape-compression
no tape-compression
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Cisco SME cluster configuration submode.
Command History
Usage Guidelines Use this command to compress encrypted data.
Examples The following example enables tape compression
switch#config t
switch(config)#sme cluster c1
switch(config-sme-cl)#tape-compression
The following example disables tape compression
switch#config t
switch(config)#sme cluster c1
switch(config-sme-cl)#no tape-compression
Related Commands
Release Modification
3.2(2) This command was introduced.
Command Description
show sme cluster tape Displays information about all tape volume groups or a specific group
show sme cluster Displays information about the Cisco SME cluster
clear sme Clears Cisco SME configuration.
To Next Page
Loading...
Need help?
General