Send documentation comments to mdsfeedback-doc@cisco.com
22-299
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show role
Role: default-role
Description: This is a system defined role and applies to all users
vsan policy: permit (default)
---------------------------------------------
Rule Type Command-type Feature
---------------------------------------------
1. permit show system
2. permit show snmp
3. permit show module
4. permit show hardware
5. permit show environment
Role: sangroup
Description: SAN management group
-----------------------------------------
Rule Type Command-type Feature
-----------------------------------------
1. permit config *
2. deny config fspf
3. permit debug zone
4. permit exec fcping
The following examples displays the role session status.
switch# show role session status
Last Action : None
Last Action Result : None
Last Action Failure Reason : None
Related Commands Command Description
role abort Enables authorization role CFS distribution.
role commit Enables authorization role CFS distribution.
role distribute Enables authorization role CFS distribution.
role name Configures authorization roles.
To Next Page
Loading...
Need help?
General