Send documentation comments to mdsfeedback-doc@cisco.com
6-61
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug ilc_helper
debug ilc_helper
To enable ILC helper debugging, use the debug ilc_helper command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
debug ilc_helper {all | errors | events | info}
no debug ilc_helper {all | errors | events | info}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug ilc_helper all command is issued:
switch# debug ilc_helper all
For Application :125, sdwrap:mts_send : Broken pipe
Related Commands
all Enables debugging for all ILC helper features.
errors Enables debugging for ILC helper error conditions.
events Enables debugging for the ILC helper events.
info Enables debugging for ILC helper information.
Release Modification
1.0(2) This command was introduced.
Command Description
no debug all Disables all debugging.
To Next Page
Loading...
Need help?
General