Send documentation comments to mdsfeedback-doc@cisco.com
3-7
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 3 B Commands
bport-keepalive
bport-keepalive
To configure keepalive responses for B port FCIP interfaces, use the bport-keepalive option. To disable
keepalive responses for B port FCIP interfaces, use the no form of the command.
bport-keepalive
no bport-keepalive
Syntax Description This command has no other arguments or keywords.
Defaults Disabled
Command Modes Interface configuration submode
Command History
Usage Guidelines Access this command from the switch(config-if)# submode.
Examples The following example shows how to configure keepalive responses for B port FCIP interfaces.
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# bport-keepalives
Related Commands
Release Modification
1.1(1) This command was introduced.
Command Description
show interface fcip Displays an interface configuration for a specified FCIP interface.
bport Configures a B port FCIP interface.
To Next Page
Loading...
