Send documentation comments to mdsfeedback-doc@cisco.com
8-46
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcs register
fcs register
To register FCS attributes, use the fcs register command in configuration mode. To disable this feature,
use the no form of the command.
fcs register
platform name name vsan vsan-id
fcs register
no platform name name vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to register FCS attributes.
switch# config terminal
switch(config)# fcs register
switch(config-fcs-register)# platform Platform1 vsan 10
Related Commands
platform name name Specifies name of the platform to register. Maximum size is 255 characters.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4096.
Release Modification
1.0(2) This command was introduced.
Command Description
show fcs Displays fabric configuration server information.
To Next Page
Loading...
Need help?
General