Send documentation comments to mdsfeedback-doc@cisco.com
11-144
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr zone rename
ivr zone rename
To rename an inter-VSAN routing (IVR) zone, use the ivr zone rename command.
ivr zone rename current-name new-name
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example renames the IVR zone from east to west.
switch# ivr zone rename east west
Related Commands
current-name Specifies the current zone name. The maximum size is 64 characters.
new-name Specifies the new zone name. The maximum size is 64 characters.
Release Modification
3.0(1) This command was introduced.
Command Description
ivr zone name Creates and configures an IVR zone.
show ivr Displays IVR information.
To Next Page
Loading...
Need help?
General