Send documentation comments to mdsfeedback-doc@cisco.com
5-23
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
device-alias distribute
device-alias distribute
To enable Cisco Fabric Services (CFS) distribution for Distributed Device Alias Services (device alias),
use the device-alias distribute command. To disable this feature, use the no form of the command.
device-alias distribute
no device-alias distribute
Syntax Description This command has no other arguments or keywords.
Defaults Enabled.
Command Modes Configuration mode.
Command History
Usage Guidelines Use the device-alias commit command to apply pending changes to the CFS distribution session.
Examples The following example shows how to enable distribution for device alias information.
switch# config terminal
switch(config)# device-alias distribute
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
device-alias commit Commits changes to the active device alias database.
device-alias database Configures and activates the device alias database.
show device-alias Displays device alias information.
To Next Page
Loading...
Need help?
General