Send documentation comments to mdsfeedback-doc@cisco.com
4-79
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear rscn statistics
clear rscn statistics
To clear the registered state change notification statistics for a specified VSAN, use the clear rscn
statistics command in EXEC mode.
clear rscn statistics vsan vsan-id
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows how to clear rcsn statistics for VSAN 1.
switch# clear rscn statistics 1
Related Commands
vsan The RSCN statistics are to be cleared for a VSAN.
vsan-id The ID for the VSAN for which you want to clear RSCN statistics.
Release Modification
1.0(2) This command was introduced.
Command Description
show rscn Displays RSCN information.
To Next Page
Loading...
Need help?
General