Send documentation comments to mdsfeedback-doc@cisco.com
4-105
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
cloud-discovery enable
cloud-discovery enable
To enable discovery of cloud memberships, use the cloud-discovery command in configuration mode.
To disable discovery of cloud memberships, use the no form of the command.
cloud-discovery enable
no cloud-discovery enable
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines This command is not supported on the Cisco MDS 9124 switch.
Examples The following example enables discovery of cloud memberships.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# cloud-discovery enable
The following example disables discovery of cloud memberships.
switch(config)# no cloud-discovery enable
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
cloud discover Initiates manual, on-demand cloud discovery.
cloud discovery Configures cloud discovery.
show cloud Displays cloud discovery and membership information.
To Next Page
Loading...
Need help?
General