Send documentation comments to mdsfeedback-doc@cisco.com
22-220
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ivr fcdomain database
show ivr fcdomain database
To display the IVR fcdomain database that contains the persistent FC ID mapping, use the show ivr
fcdomain database command.
show ivr fcdomain database [autonomous-fabric-num afid-num vsan vsan-id]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays all IVR fcdomain database entries.
switch# show ivr fcdomain database
----------------------------------------------------
AFID Vsan Native-AFID Native-Vsan Virtual-domain
----------------------------------------------------
1 2 10 11 0xc(12)
21 22 20 11 0xc(12)
Number of Virtual-domain entries: 2
----------------------------------------------------
AFID Vsan Pwwn Virtual-fcid
----------------------------------------------------
21 22 11:22:33:44:55:66:77:88 0x114466
21 22 21:22:33:44:55:66:77:88 0x0c4466
21 22 21:22:33:44:55:66:78:88 0x0c4466
Number of Virtual-fcid entries: 3
The following example displays the IVR fcdomain database entries for a specific AFID and VSAN.
switch# show ivr fcdomain database autonomous-fabric-num 21 vsan 22
----------------------------------------------------
AFID Vsan Native-AFID Native-Vsan Virtual-domain
----------------------------------------------------
21 22 20 11 0xc(12)
Number of Virtual-domain entries: 1
autonomous-fabric-num afid-num Specifies the AFID. The range is 1 to 64.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
2.1(2) This command was introduced.
To Next Page
Loading...
Need help?
General