Send documentation comments to mdsfeedback-doc@cisco.com
6-85
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug obfl
debug obfl
To enable debugging for Onboard Failure Logging (OBFL), use the debug obfl command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
debug obfl {error | trace}
no debug obfl {error | trace}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug obfl error command is issued:
switch# debug obfl error
2006 Jan 23 21:30:59.573503 obfl: obfl_process_mts_msgs(): OBFL received mts mes
sage: opc:182
Related Commands
error Enables debugging for OBFL error conditions.
info Enables debugging for OBFL events.
Release Modification
3.0(1) This command was introduced.
Command Description
no debug all Disables all debugging.
show logging onboard Displays OBFL information.
To Next Page
Loading...
Need help?
General