Send documentation comments to mdsfeedback-doc@cisco.com
6-23
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug dstats
debug dstats
To enable delta statistics debugging, use the debug dstats command in EXEC mode. To disable a debug
command use the no form of the command or use the no debug all command to turn off all debugging.
debug dstats {error | flow}
no debug dstats {error | flow}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug dstats flow command is issued:
switch# debug dstats flow
Related Commands
error Enables debugging for delta statistics error conditions.
flow Enables debugging for the delta statistics flow.
Release Modification
1.0(2) This command was introduced.
Command Description
no debug all Disables all debugging.
To Next Page
Loading...
Need help?
General