Send documentation comments to mdsfeedback-doc@cisco.com
8-16
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcc enable
fcc enable
To enable Fibre Channel Congestion Control (FCC), use the fcc enable command in configuration mode.
To disable this feature, use the no form of the command.
fcc enable
no fcc enable
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example shows how to enable FCC.
switch# config terminal
switch(config)# fcc enable
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
show fcc Displays FCC settings.
To Next Page
Loading...
Need help?
General