Send documentation comments to mdsfeedback-doc@cisco.com
8-15
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcanalyzer
switch(config)# fcanalyzer local limit-frame-size 64
Capturing on eth2
switch(config)# fcanalyzer local limit-captured-frames 10
Capturing on eth2
switch(config)# fcanalyzer local write SampleFile
Capturing on eth2
switch(config)# fcanalyzer remote 10.21.0.3
Capturing on eth2
switch(config)# fcanalyzer remote 10.21.0.3 active
Capturing on eth2
Related Commands Command Description
clear fcanalyzer Clears the entire list of configured hosts.
show fcanalyzer Displays the list of hosts configured for a remote capture.
To Next Page
Loading...
Need help?
General