Send documentation comments to mdsfeedback-doc@cisco.com
11-129
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr fcdomain database autonomous-fabric-num
ivr fcdomain database autonomous-fabric-num
To create IVR persistent FC IDs, use the ivr fcdomain database autonomous-fabric-num command.
To delete the IVR fcdomain entry for a given AFID and VSAN, use the no form of the command.
ivr fcdomain database autonomous-fabric-num afid-num vsan vsan-id
no ivr fcdomain database autonomous-fabric-num afid-num vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines This configuration only takes effect when NAT mode is enabled.
Examples The following example shows how to enter IVR fcdomain database configuration submode for AFID 10
and VSAN 20.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config) fcdomain#
The following example shows how to delete all persistent FC ID database entries for AFID 10 and
VSAN 20.
switch# config t
switch(config)# no ivr fcdomain database autonomous-fabric-num 10 vsan 20
Related Commands
afid-num Specifies the current AFID. The range is 1 to 64.
vsan vsan-id Specifies the current VSAN. The range is 1 to 4093.
Release Modification
2.1(2) This command was introduced.
Command Description
show ivr fcdomain database Displays IVR fcdomain database entry information.
To Next Page
Loading...
Need help?
General