Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-398
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show zone-attribute-group
show zone-attribute-group
To display the device name information, use the show zone-attribute-group command.
show zone-attribute-group [name group-name] | [pending] | [vsan vsan-id]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows how to display the contents of pending zone attribute groups.
switch# show zone-autoboot-group pending
zone-attribute-group name $default_zone_attr_group$ vsan 4061
zone-attribute-group name admin-group vsan 4061
broadcast
Related Commands
name group-name Displays the entire device name database.
pending Displays the pending device name database information.
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
Release Modification
2.0(x) This command was introduced.
Command Description
zone-attribute-group name Configures zone attribute groups.