Send documentation comments to mdsfeedback-doc@cisco.com
22-397
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show zone analysis
The followng example displays zone set analysis information. See Table 22-14 for a description of the
fields in this example.
switch# show zone analysis zoneset zs1 vsan 1
Zoning database analysis vsan 1
Zoneset analysis: zs1
Num zonesets: 1
Num zones: 0
Num aliases: 0
Num attribute groups: 0
Formattted size: 20 bytes / 2048 Kb
Related Commands
Num aliases Displays the total number of aliases in the database, including
unassigned FC aliases.
Num attribute groups Displays the total number of attribute groups in the database. This
field applies only when enhanced zoning is used.
Formatted database size Displays the total size of the full database when formatted to be sent
over the wire.
The formatted database size is displayed in kilobytes in this format:
< X KB / Y KB, as in the following example.
Formatted database size: < 1 KB/2000 KB
In this example, the formatted database size is less than 1 KB out of
the maximum size of 2000 KB.
Unassigned zones Displays all the unassigned zones in the VSAN. Only the names of
the zones are displayed. The details about the members of the zone
are not displayed in this section.
Table 22-14 show zone analysis Field Descriptions (continued)for the Full Zoning Database
Field Description
Command Description
zone compact
database
Compacts a zone database in a VSAN.
To Next Page
Loading...
Need help?
General