Send documentation comments to mdsfeedback-doc@cisco.com
4-65
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ntp
clear ntp
To clear Network Time Protocol (NTP) information, use the clear ntp command in EXEC mode.
clear ntp {session | statistics {all-peers | io | local | memory}}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None mode.
Examples The following example shows how to clear NTP statistics for all peers.
switch# clear ntp statistics all-peers
The following example shows how to clear NTP statistics for I/O devices.
switch# clear ntp statistics io
The following example shows how to clear NTP statistics for local devices.
switch# clear ntp statistics local
The following example shows how to clear NTP statistics for memory.
switch# clear ntp statistics memory
Related Commands
session Clears NTP CFS session configuration and locks.
statistics Clears NTP statistics.
all-peers Clears I/O statistics for all peers.
io Clears I/O statistics for I/O devices.
local Clears I/O statistics for local devices.
memory Clears I/O statistics for memory.
Release Modification
1.0(2) This command was introduced.
Command Description
show ntp Displays the configured server and peer associations.
To Next Page
Loading...
Need help?
General