Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
8-58
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fctimer distribute
fctimer distribute
To enable Cisco Fabric Services (CFS) distribution for Fibre Channel timer (fctimer), use the fctimer
distribute command. To disable this feature, use the no form of the command.
fctimer distribute
no fctimer distribute
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the fctimer commit command.
Examples The following example shows how to change the default Fibre Channel timers.
switch# config terminal
switch(config)# fctimer distribute
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
fctimer commit Commits the Fibre Channel timer configuration changes to the active
configuration.
show fctimer Displays fctimer information.