Send documentation comments to mdsfeedback-doc@cisco.com
22-91
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fcns database
show fcns database
To display the results of the discovery, or to display the name server database for a specified VSAN or
for all VSANs, use the show fcns database command.
show fcns database {detail [vsan vsan-id] | domain domain-id [detail] [vsan vsan-range] |
fcid fcid-id [detail] vsan vsan-range | local [detail] [vsan vsan-range] | vsan vsan-id}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines The discovery can take several minutes to complete, especially if the fabric is large or if several devices
are slow to respond.
Virtual enclosure ports can be viewed using the show fcns database command.
Examples The following example displays the contents of the FCNS database:
switch# show fcns database
VSAN 1:
--------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0x020101 N 22:04:00:05:30:00:35:e1 (Cisco) scsi-fcp:init isc..w <--iSCSI
0x020102 N 22:02:00:05:30:00:35:e1 (Cisco) scsi-fcp:init isc..w initiator
0x0205d4 NL 21:00:00:04:cf:da:fe:c6 (Seagate) scsi-fcp:target
0x0205d5 NL 21:00:00:04:cf:e6:e4:4b (Seagate) scsi-fcp:target
0x0205d6 NL 21:00:00:04:cf:e6:21:ac (Seagate) scsi-fcp:target
0x0205d9 NL 21:00:00:04:cf:e6:19:9b (Seagate) scsi-fcp:target
0x0205da NL 21:00:00:04:cf:e6:19:62 (Seagate) scsi-fcp:target
0x0205dc NL 21:00:00:04:cf:e6:e9:82 (Seagate) scsi-fcp:target
0x0205e0 NL 21:00:00:04:cf:e6:21:06 (Seagate) scsi-fcp:target
0x0205e1 NL 21:00:00:04:cf:e6:e0:eb (Seagate) scsi-fcp:target
Total number of entries = 10
detail Displays all objects in each entry.
vsan vsan-id Displays entries for a specified VSAN ID. The range is 1 to 4093.
domain domain-id Displays entries in a domain.
fcid fcid-id Displays entry for the given port.
local Displays local entries.
Release Modification
1.2(2) This command was introduced.
To Next Page
Loading...
Need help?
General