Send documentation comments to mdsfeedback-doc@cisco.com
22-159
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ip routing
show ip routing
To display the IP routing state, use the show ip routing command.
show ip routing
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example the IP routing state.
switch# show ip routing
ip routing is disabled
Release Modification
1.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General