Send documentation comments to mdsfeedback-doc@cisco.com
4-56
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ipv6 access-list
clear ipv6 access-list
To clear IPv6 access control list statistics, use the clear ipv6 access-list command.
clear ipv6 access-list [list-name]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines You can use the clear ipv6 access-list command to clear IPv6-ACL statistics.
Examples The following example displays information about an IPv6-ACL.
switch# clear ipv6 access-list testlist
switch#
Related Commands
access-list Displays a summary of access control lists (ACLs).
list-name Specifies the name of the ACL. The maximum size is 64.
Release Modification
3.1(0) This command was introduced.
Command Description
ipv6 access-list Configures an IPv6-ACL.
show ipv6 Displays IPv6 configuration information.
To Next Page
Loading...
Need help?
General