Send documentation comments to mdsfeedback-doc@cisco.com
11-54
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ip domain-name
ip domain-name
To configure a domain name, use the ip domain-name command in configuration mode. To delete a
domain name, use the no form of the command.
ip domain-name domain-name
no ip domain-name domain-name
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example configures a domain name.
switch# config terminal
switch(config)# ip domain-name MyDomain
Related Commands
domain-name Specifies the domain name.
Release Modification
1.0(2) This command was introduced.
Command Description
show ip route Displays the IP address of the default gateway.
To Next Page
Loading...
Need help?
General