Send documentation comments to mdsfeedback-doc@cisco.com
16-15
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 16 N Commands
ntp distribute
ntp distribute
To enable Cisco Fabric Services (CFS) distribution for Network Time Protocol (NTP), use the ntp
distribute command. To disable this feature, use the no form of the command.
ntp distribute
no ntp distribute
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Command History
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the ntp commit command.
Examples The following example shows how to distribute the active NTP configuration to the fabric.
switch# config terminal
switch(config)# ntp distribute
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
ntp commit Commits the NTP configuration changes to the active configuration.
show ntp Displays NTP information.
To Next Page
Loading...
Need help?
General