Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
4-42
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear fcflow stats
clear fcflow stats
To clear Fibre Channel flow statistics, use the clear fcflow stats command in EXEC mode.
clear fcflow stats [aggregated] module module-number index flow-number
Syntax Description
Defaults None.
Command Modes EXEC.
Command History
Examples The following example shows how to clear aggregated Fibre Channel flow statistics for flow index 1 of
module 2.
switch(config)# # clear fcflow stats aggregated module 2 index 1
Related Commands
aggregated Clears the Fibre Channel flow aggregated statistics.
module Clears the statistics for a specified module.
module-number Specifies the module number.
index Clears the Fibre Channel flow counters for a specified flow index.
flow-number Specifies the flow index number.
Release Modification
1.0(2) This command was introduced.
Command Description
show fcflow Displays the fcflow statistics.