Send documentation comments to mdsfeedback-doc@cisco.com
2-11
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 2 A Commands
abort
abort
To discard a Call Home configuration session in progress, use the abort command in Call Home
configuration submode.
abort
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Call Home configuration submode
Command History
Usage Guidelines None.
Examples The following example shows how to discard a Call Home configuration session in progress.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# callhome
switch(config-callhome)# abort
Related Commands
Release Modification
2.0(1b) This command was introduced.
Command Description
callhome Configures the Call Home function.
callhome test Sends a dummy test message to the configured destination(s).
show callhome Displays configured Call Home information.
To Next Page
Loading...
Need help?
General