Send documentation comments to mdsfeedback-doc@cisco.com
16-14
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 16 N Commands
ntp commit
ntp commit
To apply the pending configuration pertaining to the Network Time Protocol (NTP) Cisco Fabric
Services (CFS) distribution session in progress in the fabric, use the ntp commit command in
configuration mode.
ntp commit
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to commit changes to the active NTP configuration.
switch# config terminal
switch(config)# ntp commit
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.
To Next Page
Loading...
Need help?
General