Send documentation comments to mdsfeedback-doc@cisco.com
11-119
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
isns reregister
isns reregister
To register all Internet Storage Name Service (iSNS) objects for an interface that is already tagged to an
iSNS profile, use the isns register command.
isns reregister {gigabitethernet slot/number | port-channel channel-group}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines Use this command to reregister portals and targets with the iSNS server for a tagged interface.
Examples The following command re-registers portal and targets for a tagged interface:
switch# isns reregister gigabitethernet 1/4
Related Commands
gigabitethernet slot/port Specifies tagged Gigabit Ethernet interface slot and port.
port-channel channel-group Specifies tagged PortChannel group. The range is 1 to 128.
Release Modification
1.3(1) This command was introduced.
Command Description
show isns profile Displays details for configured iSNS profiles.