Send documentation comments to mdsfeedback-doc@cisco.com
22-288
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show radius
show radius
To display the RADIUS Cisco Fabric Services (CFS) distribution status and other details, use the show
radius command.
show radius {distribution status | pending | pending-diff}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the RADIUS distribution status.
switch# show radius distribution status
session ongoing: no
session db: does not exist
merge protocol status: merge activation done
last operation: none
last operation status: none
Related Commands
distribution status Displays the status of the RADIUS CFS distribution.
pending Displays the pending configuration that is not yet applied.
pending-diff Displays the difference between the active configuration and the pending
configuration.
Release Modification
2.0(x) This command was introduced.
Command Description
radius distribute Enables RADIUS CFS distribution.
To Next Page
Loading...
Need help?
General