Send documentation comments to mdsfeedback-doc@cisco.com
22-297
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show rmon status
show rmon status
To display the count of currently configured and maximum RMON alarm and hcalarm, use the show
rmon status command.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the count of currently configured and maximum RMON alarm and
hcalarm.
switch# show rmon status
Maximum allowed 32 bit or 64 bit alarms : 512
Number of 32 bit alarms configured : 0
Number of 64 bit hcalarms configured : 0
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
show rmon alarms Display the RMON alarm table.
show rmon hcalarms Display the RMON hcalarm table.
show rmon events Display the RMON event table.
show rmon logs Display the RMON event log table.
To Next Page
Loading...
Need help?
General