Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-253
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show mcast
show mcast
To display multicast information, use the show mcast command.
show mcast [vsan vsan-id]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays multicast information.
switch# show mcast
Multicast root for VSAN 1
Configured root mode : Principal switch
Operational root mode : Principal switch
Root Domain ID : 0x15(21)
Multicast root for VSAN 73
Configured root mode : Principal switch
Operational root mode : Principal switch
Root Domain ID : 0x65(101)
Multicast root for VSAN 99
Configured root mode : Principal switch
Operational root mode : Principal switch
Root Domain ID : 0xe4(228)
Multicast root for VSAN 4001
Configured root mode : Principal switch
Operational root mode : Principal switch
Root Domain ID : 0xe9(233)
Multicast root for VSAN 4002
Configured root mode : Principal switch
Operational root mode : Principal switch
Root Domain ID : 0x78(120)
vsan vsan-id Specifies the number of the VSAN. The range is 1 to 4093.
Release Modification
2.0(x) This command was introduced.