Send documentation comments to mdsfeedback-doc@cisco.com
24-3
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 24 U Commands
update license
update license
To update an existing license, use the update license command in EXEC mode.
update license {url | bootflash: | slot0: | volatile:} filename
Syntax Description
Command Modes EXEC mode.
Command History
Examples The following example updates a specific license.
switch# update license bootflash:sanextn2.lic sanextn1.lic
Updating sanextn1.lic:
SERVER this_host ANY
VENDOR cisco
# An example fcports license
INCREMENT SAN_EXTN_OVER_IP cisco 1.000 permanent 1 HOSTID=VDH=ABCD \
NOTICE=<LicFileID>san_extn1.lic</LicFileID><LicLineID>0</LicLineID> \
SIGN=33088E76F668
with bootflash:/sanextn2.lic:
SERVER this_host ANY
VENDOR cisco
# An example fcports license
INCREMENT SAN_EXTN_OVER_IP cisco 1.000 permanent 1 HOSTID=VDH=ABCD \
NOTICE=<LicFileID>san_extn2.lic</LicFileID><LicLineID>1</LicLineID> \
SIGN=67CB2A8CCAC2
Do you want to continue? (y/n) y
Updating license ..done
update license Updates an installed, expiring license.
url Specifies the URL for the license file to be uninstalled.
bootflash: Specifies the license file location in internal bootflash memory.
slot0: Specifies the license file in the CompactFlash memory or PCMCIA card.
volatile: Specifies the license file in the volatile file system.
filename Specifies the name of the license file to update.
Release Modification
1.3(2) This command was introduced.
To Next Page
Loading...
Need help?
General