Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-388
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show zone
show zone
To display zone information, use the show zone command.
show zone
[active [vsan vsan-id] |
ess [vsan vsan-id] |
member {fcalias alias-name | fcid fcid-id [lun lun-id] | pwwn wwn [lun lun-id]} [active | vsan
vsan-id] |
name string [active] [vsan vsan-id] |
statistics [lun-zoning [vsan vsan-id] | read-only-zoning [vsan vsan-id] | vsan vsan-id] |
status [vsan vsan-range]
vsan [vsan vsan-id]]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays configured zone information.
switch# show zone
zone name Zone3 vsan 1
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:9c:48:e5
zone name Zone2 vsan 2
active Displays zones which are part of active zone set.
ess Displays ESS information.
member Displays all zones in which the given member is part of.
name Displays members of a specified zone.
statistics Displays zone server statistics.
status Displays zone server current status.
vsan vsan-id Displays zones belonging to the specified VSAN ID. The range is 1 to 4093.
lun lun-id Specifies a LUN ID.
lun-zoning Displays LUN zoning related statistics
read-only-zoning Displays read-only zoning related statistics
Release Modification
1.3(4) This command was introduced.
2.1(1a) Modified the show zone status display.