Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
27-17
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 27 Z Commands
zone rename
zone rename
To rename a zone, use the zone rename command in configuration mode.
zone rename current-name new-name vsan vsan-id
Syntax Description
Defaults None.
Command Modes Configuration submode.
Command History
Usage Guidelines None.
Examples The following example shows how to rename a zone.
switch# zone rename ZoneA ZoneB vsan 10
Related Commands
current-name Specifies the current fcalias name. Maximum length is 64 characters.
new-name Specifies the new fcalias name. Maximum length is 64 characters.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
2.0(x) This command was introduced.
Command Description
show zone Displays zone information.
zone name Creates and configures zones.