Send documentation comments to mdsfeedback-doc@cisco.com
25-6
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 25 V Commands
vrrp
Examples The following example enables VRRP configuration.
switch(config-if-vrrp)# no shutdown
The following example disables VRRP configuration.
switch(config-if-vrrp)# shutdown
The following example configures an IPv4 address for the selected VRRP.
switch# config terminal
switch(config)# interface vsan 1
switch(config-if)# vrrp 250
switch(config-if-vrrp)# address 10.0.0.10
Related Commands Command Description
show vrrp Displays VRRP configuration information.
clear vrrp Clears all the software counters for the specified virtual router.
To Next Page
Loading...
