Send documentation comments to mdsfeedback-doc@cisco.com
19-5
Cisco MDS 9000 Family Command Reference
OL-16217-01 Cisco MDS SAN-OS Release 3.x
Chapter 19 Q Commands
qos enable
qos enable
To enable the QoS priority assignment for data traffic feature on the Cisco MDS 9000 family of switches,
use the qos enable command in configuration mode. To disable the QoS priority assignment for control
traffic feature, use the no form of the command.
qos enable
no qos enable
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example disables the QoS priority assignment feature.
switch# config terminal
switch(config)# qos enable
Related Commands
Release Modification
1.3(1) This command was introduced.
Command Description
show qos Displays configured QoS information.
To Next Page
Loading...
Need help?
General