Send documentation comments to mdsfeedback-doc@cisco.com
4-68
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear processes log
clear processes log
To clear the log files on the switch, use the clear processes log command in EXEC mode.
clear processes log {all | pid pid-number}
Syntax Description
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines None.
Examples The following examples show how to clear all of the log files on the switch.
switch# clear processes log all
Related Commands
all Deletes all of the log files.
pid Deletes the log files of a specific process.
pid-number Specifies the process ID, which must be from 0 to 2147483647.
Release Modification
1.0(2) This command was introduced.
Command Description
show processes Displays the detailed running or log information of processes or high
availability applications.
To Next Page
Loading...
