Send documentation comments to mdsfeedback-doc@cisco.com
20-4
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 20 R Commands
radius distribute
radius distribute
To enable Cisco Fabric Services (CFS) distribution for RADIUS, use the radius distribute command.
To disable this feature, use the no form of the command.
radius distribute
no radius distribute
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to enable RADIUS fabric distribution.
switch# config terminal
switch(config)# radius distribute
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
radius commit Commits temporary RADIUS configuration changes to the active
configuration.
show radius Displays RADIUS CFS distribution status and other details.
To Next Page
Loading...
Need help?
General