Send documentation comments to mdsfeedback-doc@cisco.com
4-49
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ficon
clear ficon
Use the clear ficon command in EXEC mode to clear the FICON information for the specified VSAN.
clear ficon vsan vsan-id [allegiance | timestamp]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines The clear ficon vsan vsan-id allegiance command aborts the currently-executing session.
Examples The following example clears the current device allegiance for VSAN 1.
switch# clear ficon vsan 1 allegiance
The following example clears the VSAN clock for VSAN 20.
switch# clear ficon vsan 20 timestamp
Related Commands
vsan vsan-id Specifies the FICON-enabled VSAN. The ID of the VSAN is from 1 to 4093.
allegiance Clears FICON device allegiance.
timestamp Clears FICON VSAN specific timestamp.
Release Modification
1.3(1) This command was introduced.
Command Description
show ficon Displays configured FICON details.
To Next Page
Loading...
Need help?
General