Send documentation comments to mdsfeedback-doc@cisco.com
4-86
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear snmp hostconfig
clear snmp hostconfig
To clear all SNMP hosts from the running configuration, use the clear snmp hostconfig command.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines You must save the changes to startup configuration to make them permanent.
Examples The following example clears the SNMP host list.
switch# clear snmp hostconfig
switch#
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
show snmp host Displays the SNMP status and setting information.
To Next Page
Loading...
Need help?
General