Send documentation comments to mdsfeedback-doc@cisco.com
16-18
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 16 N Commands
nwwn (SAN extension configuration mode)
nwwn (SAN extension configuration mode)
To configure the nWWN for the SAN extension tuner, use the nwwn command in SAN extension
configuration submode.
nwwn nwwn-id
Syntax Description
Defaults None.
Command Modes SAN extension configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to add an entry to the SAN extension tuner database.
switch# san-ext-tuner
switch(san-ext)# nwwn 20:42:00:0b:46:79:f1:80
Related Commands
nwwn-id Specifies the nWWN address. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal number.
Release Modification
2.0(x) This command was introduced.
Command Description
san-ext-tuner Enters SAN extension configuration mode.
show san-ext-tuner Shows SAN extension tuner information.
To Next Page
Loading...
