Send documentation comments to mdsfeedback-doc@cisco.com
11-124
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr copy active-topology user-configured-topology
ivr copy active-topology user-configured-topology
To copy the active inter-VSAN routing (IVR) VSAN topology to the user configured topology, use the
ivr
copy active-topology user-configured-topology command in EXEC mode.
ivr copy active-topology user-configured-topology
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines The ivr copy active-topology user-configured-topology command is useful if you need to edit the
active IVR topology, which is not allowed. Instead you copy the active IVR topology to the user
configured topology, and then edit the user configured topology.
Examples The following example copies the active IVR topology to the user configured topology.
switch# ivr copy active-topology user-configured-topology
Successfully copied active VSAN-topology to user-configured topology database
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
ivr copy active-zoneset
full-zoneset
Copies the active zone set to the full zone set.
ivr copy auto-topology
user-configured topology
Copies the automatically discovered inter-VSAN routing (IVR) VSAN
topology to the user configured topology.
show ivr vsan topology Displays the IVR VSAN topology configuration.
To Next Page
Loading...
Need help?
General