Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
18-36
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
purge fcdomain fcid
purge fcdomain fcid
To purge persistent FCIDs, use the purge fcdomain fcid command in EXEC mode.
purge fcdomain fcid vsan vsan-id
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows how to purge all dynamic, unused FCIDs in VSAN 4
switch# purge fcdomain fcid vsan 4
switch#
The following example shows how to purge all dynamic, unused FCIDs in VSANs 4, 5, and 6.
switch# purge fcdomain fcid vsan 3-5
switch#
vsan vsan-id Indicates that FCIDs are to be purged for a VSAN ID. The range is 1 to
4093.
Release Modification
1.0(2) This command was introduced.