Send documentation comments to mdsfeedback-doc@cisco.com
14-17
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 14 L Commands
logging distribute
logging distribute
To enable Cisco Fabric Services (CFS) distribution for logging, use the logging distribute command.
To disable this feature, use the no form of the command.
logging distribute
no logging distribute
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the logging commit command.
Examples The following example shows how to change the distribute logging configuration changes.
switch# config terminal
switch(config)# logging distribute
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
logging commit Commits the logging configuration changes to the active configuration.
show logging Displays logging information.
To Next Page
Loading...
Need help?
General