Send documentation comments to mdsfeedback-doc@cisco.com
23-7
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tacacs-server directed-request
tacacs-server directed-request
To specify a TACACS+ server to send authentication requests to when logging in, use the tacacs-server
directed-request command. To revert to sending the authentication request to the configured group, use
the no form of the command.
tacacs-server directed-request
no tacacs-server directed-request
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines The user can specify the username@servername during login. The user name is sent to the server name
for authentication.
Examples The following example shows how to specify a TACACS+ server to send authentication requests when
logging in.
switch# config terminal
switch(config)# tacacs-server directed-request
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
show tacacs-server Displays all configured TACACS+ server parameters.
show tacacs-server
directed request
Displays a directed request TACACS+ server configuration.
To Next Page
Loading...
Need help?
General