Send documentation comments to mdsfeedback-doc@cisco.com
20-32
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 20 R Commands
role commit
role commit
To apply the pending configuration pertaining to the authorization role Cisco Fabric Services (CFS)
distribution session in progress in the fabric, use the role commit command in configuration mode.
role commit
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to apply an authorization role configuration to the switches in the
fabric.
switch# config terminal
switch(config)# role commit
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
role distribute Enables CFS distribution for authorization roles.
show role Displays authorization roles information.
To Next Page
Loading...
Need help?
General