Send documentation comments to mdsfeedback-doc@cisco.com
22-33
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show clock
show clock
To display the system date and time and verify the time zone configuration, use the show clock
command.
show clock
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system date, time, and time zone configuration.
switch# show clock
Fri Mar 14 01:31:48 UTC 2003
Release Modification
1.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General